Atta cephalotes in Victoria BC

Post your builds, private or commercial set ups. This is where we will document the creation of housing or the planning and construction of projects from scratch. This differs from the Journal Section because this section does not concentrate on the Ants or the other animals that are being kept, this section focuses on the progress of the build.
Captainplantman
Egg
Posts: 9
Joined: Sat Nov 05, 2016 6:56 pm

Atta cephalotes in Victoria BC

Post by Captainplantman » Sat Feb 11, 2017 4:48 pm

Hey everyone, we've finally started the construction of our Atta cephalotes display and its coming along nicely. I thought I would post some pictures as we finish it.

The first of 4 aluminum frames sitting in place.
Image

All 4 frames in place and bolted together. The far left side will house the fungal colonies, the middle will be a foraging trail (Similar to Lakes Aquarium) and the right will be the feeding area. There used to be a wall here and we decided to remove it and replace is with the ant display. The other side of the display will be our insect displays.
Image

Installing the glass on the main area.
Image

Grinding down brackets.
Image

A rough layout of the insect displays.
Image

Very excited to post photos as we finish this. Would love any feedback, questions or concerns, as now would be the time to fix them!

RichardP
Worker
Posts: 437
Joined: Mon Jan 11, 2016 10:30 am

Re: Atta cephalotes in Victoria BC

Post by RichardP » Sat Feb 11, 2017 9:45 pm

It looks fantastic.. I can't wait to see how it develops...

I'll leave the usual questions of climate control to someone else :)

User avatar
Deansie26
Major
Posts: 1237
Joined: Mon Nov 30, 2015 3:30 pm
Location: Scotland

Re: Atta cephalotes in Victoria BC

Post by Deansie26 » Sat Feb 11, 2017 9:50 pm

As Richard said, very exciting! Can't wait to see how it develops. Looks like its going to be an impressive exhibit.

Britishants.com
Worker
Posts: 349
Joined: Mon Nov 30, 2015 10:38 pm

Re: Atta cephalotes in Victoria BC

Post by Britishants.com » Sun Feb 12, 2017 5:08 pm

Looks good, will watch with interest! X

Captainplantman
Egg
Posts: 9
Joined: Sat Nov 05, 2016 6:56 pm

Re: Atta cephalotes in Victoria BC

Post by Captainplantman » Tue Feb 14, 2017 12:10 am

Thanks everyone!

Not much was done over the last couple day but we did get the rope "vine" hanging to see what it looks likes.

Does anyone know if latex is safe for ants? The "vine" is covered in a latex coating and just wanted to double check with everyone.

User avatar
Acromyrmexbob
Site Admin
Posts: 2199
Joined: Tue Nov 24, 2015 10:32 pm

Re: Atta cephalotes in Victoria BC

Post by Acromyrmexbob » Wed Feb 15, 2017 9:55 pm

Looking forward to coming out to see this on Friday. Looks great. The Aluminium gives it clean lines and I think it will look fantastic when finished. The overall exhibit looks well thought out and planned. Nice open bright room. Will it be ready for this weekend for us to put the ants in?

Captainplantman
Egg
Posts: 9
Joined: Sat Nov 05, 2016 6:56 pm

Re: Atta cephalotes in Victoria BC

Post by Captainplantman » Sun Mar 12, 2017 9:23 pm

As many have seen from Andrews post, we have finishing construction of this project and the ants are happily cutting away. I'll be uploading some pictures this week for everyone to see.

User avatar
Acromyrmexbob
Site Admin
Posts: 2199
Joined: Tue Nov 24, 2015 10:32 pm

Re: Atta cephalotes in Victoria BC

Post by Acromyrmexbob » Sun Apr 02, 2017 11:44 pm

Would be great to see more pictures of the setup. Very much looking forward to seeing this colony over a period of time.

Captainplantman
Egg
Posts: 9
Joined: Sat Nov 05, 2016 6:56 pm

Re: Atta cephalotes in Victoria BC

Post by Captainplantman » Sun Jun 04, 2017 8:28 pm

Hey everyone!

Here are the rest of the pictures of the setup (Photobucket has been a nightmare so I've moved to Flickr)

Carpet is in around the display
ImageLeaf Cutter Ant Display

Finished adding substrate and the rest of the display hardware
ImageLeaf Cutter Ant Display

Two views of the chambers, like Andrew said, this is hard to explain and you really need to see it in real life to appreciate it.
ImageLeaf Cutter Ant Display
ImageLeaf Cutter Ant Display

Temporaily holding the colonies, luckily our gardens are the right temperature and humidity so we didn't have to do anything with them at this point.
ImageLeaf Cutter Ant Display

Andrew putting coco fibre to support the colony.
ImageLeaf Cutter Ant Display

Putting the colony in
ImageLeaf Cutter Ant Display
ImageLeaf Cutter Ant Display
ImageLeaf Cutter Ant Display

Putting the top back on
ImageLeaf Cutter Ant Display

ImageLeaf Cutter Ant Display

ImageLeaf Cutter Ant Display

ImageLeaf Cutter Ant Display

Captainplantman
Egg
Posts: 9
Joined: Sat Nov 05, 2016 6:56 pm

Re: Atta cephalotes in Victoria BC

Post by Captainplantman » Sun Jun 04, 2017 8:36 pm

ImageLeaf Cutter Ant Display

And lastly this is the fungus now, it has almost completely filled the original chamber now.

This is where we had a couple questions.

Should we move 1/3 of fungus to one of the new chambers?

We've added 1 litre of moist/wet coco fibre on two occasions hoping for them to start them on their own and they've moved it all to in original chamber as well on top of the chamber. We figured they were trying to seal the crack so we've taped the crack for now and they've stopping moving the coco fibre.

We were thinking of making a bed of coco like Andrew did for the introduction and the move the newest 1/3 of the colony to another chamber, any suggestions on this or should be let them do their thing?

We also noticed there was an outbreak of mites (looked like grain mites) on the outside of the fungal chamber, they've since completely dissipated, should we be worried about this in the future? We also notice the odd fungus gnat in the dump, no clue how it got in there.

Post Reply