I think the glass bonding methods I've seen are ant proof. I don't know if anyone else has has any problems of the nature you describe. In terms of using fibreglass, my experience of it is that it can be a bit "ugly". And it would increase production costs I guess. Interesting ideas though.Ruairidh wrote:What about going down the route of reinforcing the designs with plastic rims? Also, someone mentioned somewhere that ants may eat away the silicone if they find a weak spot, well what If fibreglass or is it epoxy? was used to seal internal joints? Also what's your average price to set up an ant colony?
Richards Rant
-
- Worker
- Posts: 437
- Joined: Mon Jan 11, 2016 10:30 am
Re: Richards Rant
- Leafcutter
- Minim
- Posts: 256
- Joined: Fri Nov 27, 2015 4:12 pm
Re: Richards Rant
If you think about it, along the edges of a glass tank, the edges will be touching each other for the thickness of the glass so even if the silicone was chewed, the ants wouldn't be able to escape as there wouldn't be a gap, unless the glass just fell apart then there would certainly be an issue .
Atta cephalotes (2019)
Camponotus detritus (2018)
Camponotus maculatus (2018)
- Acromyrmexbob
- Site Admin
- Posts: 2199
- Joined: Tue Nov 24, 2015 10:32 pm
Re: Richards Rant
In practice the ants will eat away all of the silicone inside the tank. If the glass is hand cut then there is a good chance they will find a gap, and the smallest minims will escape. Not been a big problem though.Leafcutter wrote:If you think about it, along the edges of a glass tank, the edges will be touching each other for the thickness of the glass so even if the silicone was chewed, the ants wouldn't be able to escape as there wouldn't be a gap, unless the glass just fell apart then there would certainly be an issue .
Sean, if you want I can stick you in an aquarium factory for a couple of days to learn how to build tanks. Would mean coming up here and staying locally for a couple of nights but you would be able to build and cut by the end. Glass can be bought very cheaply, happy to pass on contacts etc.Britishants.com wrote:Glass is a lot cheaper and I've approached small and large manufacturers with designs with no luck! the greatest worry is that it needs to meet a price point and be able to survive our dodgy postal service! If one in three gets damaged the next two sales are at a loss! no (small) business could afford that risk. Packaging on such items could amount to a third of the price not to mention the weight costs! Antstore make more profit because they construct them, removing the middle man as it where. It's something I'm still interested in tho!
-
- Worker
- Posts: 349
- Joined: Mon Nov 30, 2015 10:38 pm
Re: Richards Rant
I think it's time I came up there and harassed you in person! I have tried glass cutting, it wasn't successful if I'm honest
- Acromyrmexbob
- Site Admin
- Posts: 2199
- Joined: Tue Nov 24, 2015 10:32 pm
Re: Richards Rant
You can stay with me if you want.
-
- Larva
- Posts: 47
- Joined: Fri Feb 26, 2016 8:58 am
Re: Richards Rant
Had an idea of a simple way of adding and removing pipes, now lets see if I can upload an image...
Please scrutinise (If you work out the drawing) and il see if I can do anything about it, i also have ideas for vents etc using this design.
Please scrutinise (If you work out the drawing) and il see if I can do anything about it, i also have ideas for vents etc using this design.
-
- Worker
- Posts: 437
- Joined: Mon Jan 11, 2016 10:30 am
Re: Richards Rant
I couldn't see the image? Photobucket seems to work well..?
-
- Larva
- Posts: 47
- Joined: Fri Feb 26, 2016 8:58 am
Re: Richards Rant
Does anyone know how to fix it? I also can't edit that reply with the image o.O
-
- Worker
- Posts: 437
- Joined: Mon Jan 11, 2016 10:30 am
Re: Richards Rant
It depends what the problem is. How have you tried to link the image.
A good way to do it is to create a photobucket account. Upload the picture to that service and then there is a box to the right of the photo that will copy a URL link to your clipboard. Just paste that into your forum post.
A good way to do it is to create a photobucket account. Upload the picture to that service and then there is a box to the right of the photo that will copy a URL link to your clipboard. Just paste that into your forum post.
-
- Larva
- Posts: 47
- Joined: Fri Feb 26, 2016 8:58 am
Re: Richards Rant
Ach, il just make a 3D model when I get home